The Delta 6200 XHD is the perfect machine for those individuals who require a high precision grinderIt produces a flat mating surface and is quickly adjustable to the original mating surface
The setup is very quick: Place magnetic straight edge on table face, then place cap or rod against surface and tighten down. This same operation can be used on overhead cam caps.
The stone can be dressed before and during the grinding operation if required.
The diamond dresser is mounted on side of the table.
This grinder will do caps upto 4" high and 17" long. Work table is 12" square.
Readily grinds ends of caps after welding for better fit in block.
Stone angle adjusts in seconds for quick set-up. No shimming is required.
Grinds 12-V-149 DDA, 398 CAT, 12 & 16 KV Cummins in less than 5 minutes.
Operates dust free with built-in vacuum system.
Electrical: 1-1/2 HP 3 Phase
Weight: 900 lbs
Dimensions: 32 deep 36 long
800-841-5405, 712-852-4627