AUDIE DATA AQUISITION HARDWARE

BASE SENSOR PACKAGE (VERSION 2) USWED ON ALL SAENZ J-600 AND J-1000 SERIES FLOWBENCHES.

THIS CAN BE ADDED TO A MANUAL FLOWBENCH AND USED WITH FLOW PRO SOFTWARE.

Improved Accuracy & Repeatability
Flow Pro increases both the accuracy and repeatability of your flow testing. High quality pressure sensors accurately read depression, flow, pitot tube, and carburetor jet signals. Operator to operator variations are minimized. Flow is automatically compensated for minor variations in depression, enhancing the usefulness and validity of test to test comparisons.

Modular Design
Flow Pro hardware's modular design lets you start small and add components as you need them. A beginning configuration is a Base Sensor Module and Flow Pro software. From there you can grow by adding a pitot / carburetor jet sensor, pitot tubes, digital dial indicator, depression control, automatic valve opener, or swirl meter. Flow Pro is compatible with most flow benches, including many "home made" benches.

Easy Installation
Flow Pro hardware mounts on the side of your Flow Bench. (Some Flow Bench manufacturers will build Flow Pro into the bench for you). Flow and depression signals are obtained by teeing into the plastic tubing that feeds the manometers on your bench. The temperature probe is designed as a screw-in replacement for the dial type probes used on many benches. An IBM compatible computer (not included) is required for operation. No add-in cards are used. Connection to your computer is through the computer's COM port. The Audie Technology swirl meter may require the use of a second COM port.

Fast Easy Testing
Reading manometers, writing down numbers, punching calculator buttons, sifting through stacks of paper -- it all takes time. But that's no problem; you have lots of spare time, Right? Flow Pro users report reductions in testing time of 50% to 90%. Get Flow Pro and spend more time planning how to improve your heads, and less time on the tedious chores of old-fashioned flow testing.

Fits Most Benches
Flow Pro is compatible with most flow benches, including many "home made" benches. Flow Pro supports SuperFlow, Flow Data, Saenz, and JKM flow benches.

Base Sensor Package Sensor Module with Int/Exh and Range switches
Sensor Module with Int/Exh & Range switches
1 Temperature Probe
Foot switch
Power supply
Cables and hook-up tubing

Options
Digital Dial Indicator
Sensor for use with pitot tubes and carburetor jets
Pitot Tubes
Extra Temperature Probe
Depression Controlr
Valve Opener

Sensor Module Supports
Depression pressure sensor
Flow pressure sensor
Pitot/Carburetor booster pressure sensor (optional)
2 Temperature sensors (1 standard, 1 optional)
Auxiliary data channel
Digital dial indicator (optional)
Foot Switch
Intake/Exhaust switch
Valve Opener